
92 | Wireless Network Profiles AOS-W Instant 6.3.1.1-4.0 | User Guide
Figure 36 Security Tab: Open
2. Based on the security level specified, specify the following parameters:
Parameter Description
Security Level
Type
Key
Management
For Enterprise security level, select any of the following options from the
Key management drop-down list:
l WPA-2 Enterprise
l Both (WPA-2 & WPA)
l WPA Enterprise
l Dynamic WEP with 802.1X — If you do not want to use a session key
from the RADIUS Server to derive pair wise unicast keys, set Session
Key for LEAP to Enabled. This is required for old printers that use
dynamic WEP through Lightweight Extensible Authentication Protocol
(LEAP) authentication. The Session Key for LEAP feature is Disabled
by default.
NOTE: When WPA-2 Enterprise and Both (WPA2-WPA) encryption types
are selected and if 802.1x authentication method is configured, the
Opportunistic Key Caching (OKC) is enabled by default. If OKC is enabled,
a cached pairwise master key (PMK) is used when the client roams to a
new AP. This allows faster roaming of clients without the need for a
complete 802.1x authentication. OKC roaming can be configured only for
the Enterprise security level.
Applicable to
Enterprise and
Personal security
levels only.
For the Open
security level, no
encryption settings
are required.
For Personal security level, select an encryption key from the Key
management drop-down list.
l For WPA-2 Personal, WPA Personal, and Both (WPA-2&WPA) keys,
specify the following parameters:
1. Passphrase format: Select a passphrase format from the
Passphrase format drop-down list. The options are
available are 8-63 alphanumeric characters and 64
hexadecimal characters.
2. Enter a passphrase in the Passphrase text box and
reconfirm.
l For Static WEP, specify the following parameters:
Table 18:
Configuration Parameters for WLANSecurity Settings
Comentários a estes Manuais