Alcatel-Lucent IAP93 Guia do Utilizador descarregar pdf (Página 161)

161 | Authentication AOS-W Instant 6.3.1.1-4.0 | User Guide

Loading Certificates using AOS-W Instant UI

To load a certificate in the AOS-W Instant UI:

1. Click the Maintenance link at the top right corner of the AOS-W Instant main window.

2. Click the Certificates tab. The Certificates tab contents are displayed. The following figure shows the

Certificates window:

Figure 51 Maintenance Window: Certificates Tab

3. To upload a certificate, click Upload New Certificate. The New Certificate window is displayed.

4. Browse and select the file to upload.

5. Select any of the following types of certificate from the Certificate type drop-down list:

l CA—CA certificates validate the client’s certificate.

l Auth Server—The authentication server certificate verifies the server's identity to the client.

l Captive portal server—Captive portal server certificate verifies internal Captive portal server's identity to the

client.

6. Select the certificate format from the Certificate format drop-down list.

7. If you have selected Auth Server or Captive portal server type, enter a passphrase in Passphrase and

reconfirm. The default password is whatever. If the certificate does not include a passphrase, there is no

passphrase required.

8. Click Browse and select the appropriate certificate file, and click Upload Certificate. The Certificate

Successfully Installed message is displayed.

Loading Certificates using AOS-W Instant CLI

To upload a certificate:

(Instant Access Point)# copy tftp {<ip-address> <filename> cpserver cert <password> format

{p12|pem} |system {1xca [format {der|pem}]|1xcert <passsword>[format {p12|pem}]}

Loading Certificates using Omnivista

You can manage certificates using the OmniVista. The AMP directly provisions the certificates and performs basic

certificate verification (such as certificate type, format, version, serial number and so on), before accepting the

certificate and uploading to anOAW-IAP network. The AMP packages the text of the certificate into an HTTPS

message and sends it to the Virtual Controller. After the VC receives this message, it draws the certificate content

from the message, converts it to the right format and saves it on the RADIUS server.

To load a certificate in Omnivista:

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 334 335

Sem comentários

Alcatel-Lucent IAP93 Guia do Utilizador Página 161